Cam Follower bearing

Cam Follower bearing manufacturers

Cam Follower bearing

Cam Follower Bearings are complete units consisting of thick-walled outer rings, axial washers, and needle roller and cage assemblies or full complement needle roller sets and inner rings, they are mounted on a shaft or stud, they can support high radial forces, protected from contamination and water spray by lip seals or gap seals, with a plastic axial plain washer with an integral lip seal between the outer ring and axial washer on both sides. This means that: running behavior under angular misalignment and axial contact is improved effective sealing is ensured. They are lubricated with lithium complex soap grease in accordance with DIN 51825–KP2N–25 and they can be relubricated via the inner ring, conform to the draft standard ISO/CD 7063.

types of Cam Follower bearing

KR/KRV/KRVE/KRE/CF And With or without PP seal

Model Number of Cam Follower bearing

Without PP seal: KR10-CF3, KR12-CF4, KR13-CF5, KR16-CF6, KR19-CF8, KR22-CF10, KR26-CF10-1, KR30-CF12, KR32-CF12-1, KR35-CF16,KR40-CF18, KR47-CF20-1, KR52-CF20, KR62-CF24, KR72-CF24-1, KR80-CF30, KR85-CF30-1, KR90-CF30-2

With PP seal: KR13-CF5, KR16-CF6, KR19-CF8, KR22-CF10, KR26-CF10-1, KR30-CF12, KR32-CF12-1, KR35-CF16, KR40-CF18, KR47-CF20-1, KR52-CF20, KR62-CF24, KR72-CF24-1, KR80-CF30